Follow us :

SUNBEARING Pillow Block Bearing UCF206 Dark Green 30*108*108mm

SUNBEARING Pillow Block Bearing UCF206 Dark Green 30*108*108mm
SUNBEARING Pillow Block Bearing UCF206 Dark Green 30*108*108mmSUNBEARING Pillow Block Bearing UCF206 Dark Green 30*108*108mmSUNBEARING Pillow Block Bearing UCF206 Dark Green 30*108*108mmSUNBEARING Pillow Block Bearing UCF206 Dark Green 30*108*108mmSUNBEARING Pillow Block Bearing UCF206 Dark Green 30*108*108mm
group name
Pillow Block Bearing
Min Order
1 piece
brand name
SUNBEARING Rolling Bearing Manufacturer
model
UCF206
Nearest port for product export
Dalian
Delivery clauses under the trade mode
FOB, CFR, CIF, DDP
Acceptable payment methods
T/T, L/C, PayPal, Westem Union
update time
Mon, 31 May 2021 15:19:25 GMT

Packging & Delivery

  • Min Order1 piece

Briefing

Suitable for high speed operation, very durable, without frequent maintenance.

Detailed

  Product Description  


Product Name Pillow Block Bearing UCF206
Structure Pillow block Bearing Seals Rubber Seal
Bore Size 30mm Bore Type Round
Outside Diameter 108 mm Duty Type Medium Duty, Heavy Duty, and Others 
Width 108 mm Operating Temperature Range: -20 to +120°C
Material Chrome Steel, Carbon Steel, Stainless Steel Lubrication Type: Oil; Grease;
Cage GCR 15, Stainless steel, etc. Series: UCF
Certificate ISO9001:2008 Features Suitable for high-speed operation, very durable, without frequent maintenance.
Colour Dark Green Bearing Structure Spherical Surface Ball Bearing
The Number Of  Rows Single Weight 1kgs
Clearance C2 C0 C3 C4 C5 Tolerance ABEC1  ABEC3  ABEC5  ABEC7

 pillow block bearing

Adjustable Pillow block bearing installation:


1. To install the shaft bearing, must pull off the bearing sleeve fixed pin, while make the shaft neck surface smooth and clean, and in the shaft neck oiler and lubrication ( to allow the bearing on the shaft to rotate a little ).


2. Coated lubricating oil in the bearing seat and the bearing surface , arranged the bearing in a bearing seat. Then assembled together the bearing and the bearing seat ,push to the desired location for installation


3. Fixed bearing seat bolt but not to tighten, let the bearing in the bearing seat can rotate. Also install bearing and the other end seat on the same shaft , rotate the shaft several times, make the bearing itself automatically aligning position. Then fasten the bearing seat.


4. Eccentric sleeve. Put the eccentric sleeve on the inner sleeve of the eccentric step, and hand along the direction of rotation of the shaft to tighten. Then the small iron insert or withstand the eccentric sleeve on the sink hole with hammer along the direction of rotation of the shaft on small iron. The eccentric sleeve is firmly installed, the last lock on the eccentric sleeve in six hexagon screw.