UCP208 40mm Pillow Block Housing Unit Bearing Cast Iron SUNBEARING

group name: Pillow Block Bearing

Min Order: 1 piece

brand name: SUNBEARING Rolling Bearing Manufacturer

model: UCP208

Nearest port for product export: Dalian

Delivery clauses under the trade mode: FOB, CFR, CIF, DDP

Acceptable payment methods: T/T, L/C, PayPal, Westem Union

update time: Thu, 07 Apr 2022 17:17:02 GMT

contact supplier

Paramtents

Color Green
Bore Size 40 mm
L 184 mm
H2 98 mm

Packging & Delivery

Min Order1 piece

Briefing

UCP208 bearing is a complete sealed bearing and cast iron housing unit. It is one of the most economical and common bearings.

Detailed

UCP208 40mm Pillow Block Housing Unit Bearing Cast Iron SUNBEARING

Product Name	Pillow Block Bearing UCP208
Structure	Pillow block Bearing	Limiting speed Bearing with shaft tolerance h6	3750 r/min
Bore Size	40 mm	Housing material	Cast iron
L	184 mm	Set screw	M8x1
H₂	98 mm	Hexagonal key size for set screw	4 mm
Designation, housing	P208	Recommended tightening torque for set screw	11.5 Nm
The Designation, Radial Insert Ball Bearing	UC208	Mounting Bolt Size	14 mm
Bearing Type	Extended inner race with set screws	Bearing Inner Race Width - Extended Side (m)	30.2 mm
A	49 mm	T min.	-20 °C
Product weight:	1.84 kg	T max.	100 °C
Material	Cast iron housing, chrome steel bearing	Mounting Hole Center-to-Center (e)	137 mm
Dynamic Load Rating (Cr)	30.7 kN	Mounting Slot Length (S2)	21 mm
Static Load Rating (Cor)	19 kN	Mounting Slot Width (S1)	17 mm
Fatigue load limit	0.8 kN	Housing Base Thickness (g)	17 mm

UCP208 Bearing Features

UCP208 bearing is a complete sealed bearing and cast iron housing unit. It is one of the most economical and common bearings used in many machinery applications, that fits onto a 40mm shaft, secured by 2 grub screws.

It has a base plate length of 180mm and a base width of 52mm. The distance from base to shaft center is 49.2mm, with the distance through the bore of 49.2 mm. The overall height of the unit is 98mm.

The bearing used within the assembly is UC208 and the casting has part no. P208 The center distance of the mounting bolts is approx 136mm. With elongated holes for ease of fit.

How to Install Pillow Block Bearing

1. Before installing the pillow block bearing on the shaft, you must first unplug the fixing pin of the bearing jacket, and at the same time polish, the surface of the journal smoothly and clean, and apply oil to the journal to prevent rust and lubricate (allow the bearing to rotate slightly on the shaft).

2. Apply lubricating oil on the mating surface of the bearing seat and the bearing and install the bearing into the bearing housing. Then put the assembled bearing on the shaft together with the bearing seat. Push to the desired location for installation.

3. Do not tighten the bolts that fix the bearing seat but allow the bearing housing to rotate in the bearing seat. Also, install the bearing and seat on the other end of the same shaft, rotate the shaft a few times, and let the bearing itself automatically find its position. Then tighten the bearing seat bolts.

4. Install the eccentric sleeve. First, put the eccentric sleeve on the eccentric step of the bearing inner sleeve, and tighten it by hand in the direction of rotation of the shaft. Then insert the small iron rod into or against the counterbore on the eccentric sleeve. Knock the small iron rod along the axis of rotation with a hand hammer. Install the eccentric sleeve firmly, and finally tighten the hexagon socket screws on the eccentric sleeve.