There are many factors that affect bearing life expectancy. For example, the installation, disassembly, and maintenance of the bearing.

A bearing selection guide is to make bearing to adapt to the specific installation position and application conditions of a certain host.

Judging the reusable bearing. Inspect the bearings that were disassembled during the regular maintenance of the equipment, operation inspection.

Bearing damage analysis is a very important step to maintain your machines.When the bearing performance index is lower than requirement.

Rolling bearing overheating is a common and harmful fault of rotating equipment. This will reduce bearing life and increase maintenance costs.

Bearing noise diagnosis is convenient to judge whether the bearing is faulty and whether you need to replace the bearing. 

bearing maintenance is an important part of prolonging the service life of bearings and make sure bearing rotation speed.

Bearing maintenance is of great significance to extending the application life of mechanical equipment and improving the efficiency of mechanical equipment. 

Rolling bearing clearance adjustment and preload is an important part of the rolling bearing assembly work which can extend bearing life.

Bearing grease vs bearing oil has become a complex question for people. In order to reduce friction and damage, choose proper lubrication.

Bearing tolerance refers to the accuracy of determining the size, that is, the allowable variation range of the size. Choose right tolerance is important.

The tapered roller bearing is mainly bear combined radial and axial loads based on radial directions. Bearing capacity depends on the raceway angle.

How to install bearings correctly is related to the service life of the bearing. It's very significant. So everyone must pay attention to it.

Taper roller bearings mainly bear the combined radial and axial loads based on the radial direction. Its capacity depends on outer ring raceway angle.

Motor bearings are key components that support the normal operation of motors. vertical motors and horizontal motors should choose different bearings.

How to install heavy-duty roller bearings is an operation in equipment repair work. The adjustment and preloading are an important part.

Sliding bearings are kinds of bearing with sliding friction properties. It has the characteristics of smooth operation and low noise. 

Joint bearings are spherical plain bearings. Its sliding contact surface is an inner spherical surface and an outer spherical surface. 

Linear guides bearing is a kind of linear motion system. People use it in linear stroke and cooperate with the cylindrical shaft.

Motorcycle wheel bearings are mostly precision parts. it is very important to install and use the motorcycle bearings correctly. 

How to identify fake bearings is very important in the industry. Fake bearings can directly lead to the lack of competitiveness of brand bearings.

High-temperature grease and butter are indispensable in the use of high-speed bearings. Because the bearing generates heat when it rotates at a high speed.

Ceramic ball bearings are a typical example of the wide application of engineering ceramics in the industrial field, they are highly valued.

Explain the different uses of different materials of ceramic ball bearings.

The so-called bearing preload is to keep the rolling elements of the bearing in close contact with the inner and outer rings of the bearing. This is often achieved by applying an external force.

Yo-Yo ball bearings are an indispensable component of  Yo-Yo ball, how big is the difference between them at different prices.

Fan spindle bearing is almost the most important component in a wind turbine. This article introduces the fan spindle bearing.

Complete analysis on the difference between ceramic material bearings and conventional bearings, and brief introduction of ceramic material bearings.

The continent is about a brief introduction of wheel bearing, and a complete introduction of wheel bearings' development history.

This article will introduce you to two steel materials(chromium steel and stainless steel.) that are used in bearings, and the difference between them.

All you want to know about bearing rust: the reason why bearing rust happens, four prevention methods and what should I do if my bearing is rusty.

This article will introduce you guys to five steps on how to correctly install bearings in detail, this is related to the service life of the bearing.

Wind turbines are generally divided into doubly-fed, direct-drive, and hybrid types. The most widespread use of bearings is the traditional doubly-fed wind turbine.

From the perspective of the bearing industry, how to reduce the vibration and noise caused by manufacturing factors is a problem that must solve.

608 bearings are mainly loved by roller skating enthusiasts. Mainly used on the wheels of roller skates. Bearings for skateboards are generally 608 or 688, and each wheel needs two bearings

Steel balls are divided into grinding steel balls, forging steel balls, and casting steel balls according to the production and processing technology.

Bearing is an important part of mechanical equipment. Its main function is to support the mechanical rotating body to reduce the mechanical load friction coefficient of the equipment in the transmission process.

Bearing vibration refers to the elastic deformation of bearing parts changing with time and all other movements deviating from the theoretical position except those necessary for bearing function.

Bearing steel is used to make balls, rollers, and bearing rings. Bearing steel has high and uniform hardness, wear resistance, and high elastic limit. The requirements for the uniformity of chemical composition, the content, and distribution of non-metallic inclusions, and the distribution of carbides of bearing steel are very strict.

Bearing is the main application object of grease, and more than 85% of grease is applied to all kinds of bearings. Lubricating grease is of great significance to maintaining the good operation of bearings, reducing bearing wear and reducing bearing failure rate.